Glass Signs & Displays (Glass)

Stock: 6mm, Low Iron, Toughened glass.
We also allow our customers to provie their own glass if they have a prefered glass supplier.

Mounting Holes: Option available for 20mm holes to use with standoffs or mounting pins.
Note: We don't include standoffs as there are many variations available and we cannot accommodate to all variations.

Ink set: matte UV inks reverse printed. (will still appear gloss as it's printed behind the glass)

General Artwork Guidelines

• 3mm Bleed on all edges + 3mm safe zone. (40mm safe zone for banners)
• No crop or trim marks
• All fonts to be outlined
• PDF is highly recommended; TIFF & JPEG is also accepted.
• Artwork to be provided at 100% of the final size
• File name to include finished size and quantity: “Print01 – 600x900mm – qty10”

Artwork Guidelines for white ink:

Our white ink uses a spot channel called "Spot1" (case sensitive)

• Anything that's coloured with white ink needs to be on the TOP layer marked as "white ink"
• All white ink fills need to have "over print fill "on"" 
• All white ink fill and stroke need to have it's own swatches with the following settings:
  Swatch name: Spot1
  Colour type: Process Color
  Colour mode: CMYK
  Colours: Cyan: 99%, Magenta: 1%, Yellow, 99%, Black, 1% (not critical)

Artwork guidelines for Kiss Cut & Die cut products:

• 3mm bleed around the cut path
• Kiss cut path - place a RED stroke on a separate layer called “Kiss-Cut” (this goes around every sticker you want on the sheet)
• Die path - place a RED stroke on a separate layer called “Thru-Cut”